|
Intel's i486SX was a modified Intel 486DX microprocessor with its floating-point unit (FPU) disabled. It was intended as a lower-cost CPU for use in low-end systems. Computer manufacturers that used these processors include Packard Bell, Compaq, ZEOS and IBM. All early 486SX chips were actually i486DX chips with a defective FPU. If testing showed that the central processing unit was working but the FPU was defective, the FPU's power and bus connections were destroyed with a laser and the chip was sold as an SX; if the FPU worked it was sold as a DX. Back in the early 1990s, common wisdom held that it wasn't advantageous for most users to have an FPU. Thus, many typical household applications already in existence like word processing and email were designed specifically to avoid using floating point operations. When floating point operations needed to be performed they were still performed, but not in hardware; instead the operations were usually facilitated by transparent software emulation. Some systems allowed the user to upgrade the i486SX to a CPU with a FPU. The FPU upgrade device was shipped as the i487, which was a full blown i486DX chip with an extra pin. The i487 was installed in an upgrade socket and the extra pin was either a power or ground pin that indicated that the i487 was installed. That signal was used to disable the i486SX when the i487 was installed. Although i486SX devices were not used at all when the i487 was installed, they were hard to remove because the i486SX was typically installed in non-ZIF sockets or in a plastic package that was surface mounted on the motherboard. File:I486sx.jpg|Pin side of an Intel i486 SX File:KL_Intel_i486SX_PQFP.jpg|Embedded i486SX (SQFP version). File:Intel i486SX-25.jpg|BQFP version. ==References== 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Intel 80486SX」の詳細全文を読む スポンサード リンク
|