| 翻訳と辞書 |
| Cryofixation ： ウィキペディア英語版 |
Cryofixation
Cryofixation is a technique for fixation or stabilisation of biological materials as the first step in specimen preparation for electron microscopy. Typical specimens for cryofixation include small samples of plant or animal tissue, cell suspensions of microorganisms or cultured cells, suspensions of viruses or virus capsids and samples of purified macromolecules, especially proteins.〔Echlin P (1992) Low Temperature Microscopy and Analysis. Plenum Publishing Corporation, New York〕〔Dubochet J, Adrian M, Chang J-J, Homo J-C, Lepault J, McDowall AW, Schulz P (1988) Cryo-electron microscopy of vitrified specimens, Quarterly Review of Biophysics 21, 129-228〕
The method involves ultra-rapid cooling of small samples to the temperature of liquid nitrogen (−196 °C) or below, stopping all motion and metabolic activity and preserving the internal structure by freezing all fluid phases solid. The ultimate objective is to freeze the specimen so rapidly (at 104 to 106 K per second) that ice crystals are unable to form, or are prevented from growing big enough to cause damage to the specimen's ultrastructure. The formation of samples containing specimens in amorphous ice is the holy grail of biological cryomicroscopy.
However, in practice, it is very difficult to achieve high enough cooling rates to produce amorphous ice in specimens more than a few micrometres in thickness. For this purpose, plunging a specimen into liquid nitrogen at its boiling point (−196 °C)〔Battersby BJ, Sharp JCW, Webb RI, Barnes GT (1994) Vitrification of aqueous suspensions from a controlled environment for electron microsocopy: an improved plunge-cooling device. Journal of Microscopy 176, 110-120〕 does not always freeze the specimen fast enough, for several reasons. First, the liquid nitrogen boils rapidly around the specimen forming a film of insulating gas that slows heat transfer to the cryogenic liquid, known as the Leidenfrost effect. Cooling rates can be improved by pumping the liquid nitrogen with a rotary vane vacuum pump for a few dozen seconds before plunging the specimen into it. This lowers the temperature of the liquid nitrogen below its boiling point, so that when the specimen is plunged into it, it envelops the specimen closely for a brief period of time and extracts heat from it more efficiently. Even faster cooling can be obtained by plunging specimens into liquid propane or ethane (ethane has been found to be more efficient) cooled very close to their melting points using liquid nitrogen〔Bald WB (1984) The relative efficiency of cryogenic fluids used in the rapid quench-cooling of cryogenic samples. Journal of Microscopy 134, 261-270〕 or by slamming the specimen against highly polished liquid nitrogen-cooled metal surfaces made of copper or silver.〔Allison DP, Daw CS and Rorvik MC (1987) The construction and operation of a simple and inexpensive slam freezing device for electron microscopy. Journal of Microscopy 147, 103-108〕 Secondly, two properties of water itself prevent rapid cryofixation in large specimens.〔Bald WB (1987) Quantitative Cryofixation. Adam Hilger, Bristol and Philadelphia〕 The thermal conductivity of ice is very low compared with that of metals, and water releases of latent heat of fusion as it freezes, defeating rapid cooldown in specimens more than a few micrometres thick.
Self pressurized rapid freezing (SPRF) can utilize many different cryogens has recently been touted as an attractive and low cost alternative to high pressure freezing (HPF).
==References==
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Cryofixation」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|