|
A Digital Signal 3 (DS3) is a digital signal level 3 T-carrier. It may also be referred to as a T3 line. *The data rate for this type of signal is 44.736 Mbit/s (45 Mb). *This level of carrier can transport 28 DS1 level signals within its payload. *This level of carrier can transport 672 DS0 level channels within its payload. *Such circuits are the usual kind between telephony carriers, both wired and wireless, and typically by OC1 optical connections. ==Cabling== DS3 interconnect cables must be made with true 75 ohm coaxial cable and connectors. Cables or connectors which are 50 ohm or which significantly deviate from 75 ohms will result in signal reflections which will lower the performance of the connection, possibly to the point of not working. (GR-139-CORE, ) ''Generic Requirements for Central Office Coaxial Cable'', defines type 734 and 735 cables for this application. Due to losses, there are differing distance limitations for each type of cable. Type 734 has a larger center conductor and insulator for lower losses for a given distance. The BNC connectors are also very important as are the crimping and cable stripping tools used to install them. Trompeter, Cannon, Amphenol, Kings, and Canare make some of the true 75 ohm connectors known to work. RG-6 or even inexpensive RG-59 cable may work temporarily when properly connectorized, though it does not meet telephony technical standards. Type 735 26 AWG is used for interconnects up to 225 feet, and Type 734 20 AWG is used for interconnects up to 450 feet. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Digital Signal 3」の詳細全文を読む スポンサード リンク
|