| 翻訳と辞書 |
Fretting
Fretting refers to wear and sometimes corrosion damage at the asperities of contact surfaces. This damage is induced under load and in the presence of repeated relative surface motion, as induced for example by vibration. The ASM Handbook on Fatigue and Fracture defines fretting as: "''A special wear process that occurs at the contact area between two materials under load and subject to minute relative motion by vibration or some other force.''" Fretting tangibly downgrades the surface layer quality producing increased surface roughness and micropits; which reduces the fatigue strength of the components.
The amplitude of the relative sliding motion is often in the order from micrometers to millimeters, but can be as low as 3 to 4 nanometers.〔ASM Handbook, Vol.13 "Corrosion", ASM International, 1987.〕
The contact movement causes mechanical wear and material transfer at the surface, often followed by oxidation of both the metallic debris and the freshly exposed metallic surfaces. Because the oxidized debris is usually much harder than the surfaces from which it came, it often acts as an abrasive agent that increases the rate of both fretting and a mechanical wear called false brinelling.
==Steel==
Fretting damage in steel can be identified by the presence of a pitted surface and fine 'red' iron oxide dust resembling cocoa powder. Strictly this debris is not 'rust' as its production requires no water. The particles are much harder than the steel surfaces in contact, so abrasive wear is inevitable; however, particulates are not required to initiate fret.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Fretting」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|