|
The High Power laser Energy Research facility (HiPER), is a proposed experimental laser-driven inertial confinement fusion (ICF) device undergoing preliminary design for possible construction in the European Union. HiPER is the first experiment designed specifically to study the "fast ignition" approach to generating nuclear fusion, which uses much smaller lasers than conventional designs, yet produces fusion power outputs of about the same magnitude. This offers a total "fusion gain" that is much higher than devices like the National Ignition Facility (NIF), and a reduction in construction costs of about ten times. A similar ICF experimental setup in Japan was known as "HIPER", but this is no longer operational. ==Background== Inertial confinement fusion (ICF) devices use "drivers" to rapidly heat the outer layers of a "target" to compress it. The target is a small spherical pellet containing a few milligrams of fusion fuel, typically a mix of deuterium and tritium. The heat of the laser burns the surface of the pellet into a plasma, which explodes off the surface. The remaining portion of the target is driven inwards due to Newton's Third Law, eventually collapsing into a small point of very high density. The rapid blowoff also creates a shock wave that travels towards the center of the compressed fuel. When it reaches the center of the fuel and meets the shock from the other side of the target, the energy in the shock wave further heats and compresses the tiny volume around it. If the temperature and density of that small spot can be raised high enough, fusion reactions will occur.〔"(How NIF works )", Lawrence Livermore National Laboratory. Retrieved on 2 October 2007.〕 The fusion reactions release high-energy particles, some of which (primarily alpha particles) collide with the high density fuel around it and slow down. This heats the fuel further, and can potentially cause that fuel to undergo fusion as well. Given the right overall conditions of the compressed fuel—high enough density and temperature—this heating process can result in a chain reaction, burning outward from the center where the shock wave started the reaction. This is a condition known as "ignition", which can lead to a significant portion of the fuel in the target undergoing fusion, and the release of significant amounts of energy.〔Per F. Peterson, ''(Inertial Fusion Energy: A Tutorial on the Technology and Economics )'', University of California, Berkeley, 1998. Retrieved on 7 May 2008.〕 To date most ICF experiments have used lasers to heat the targets. Calculations show that the energy must be delivered quickly to compress the core before it disassembles, as well as creating a suitable shock wave. The energy must also be focused extremely evenly across the target's outer surface to collapse the fuel into a symmetric core. Although other "drivers" have been suggested, notably heavy ions driven in particle accelerators, lasers are currently the only devices with the right combination of features.〔Per F. Peterson, ''(How IFE Targets Work )'', University of California, Berkeley, 1998. Retrieved on 8 May 2008.〕〔Per F. Peterson, ''(Drivers for Inertial Fusion Energy )'', University of California, Berkeley, 1998. Retrieved on 8 May 2008.〕 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「HiPER」の詳細全文を読む スポンサード リンク
|