|
InCa3D is a simulation tool dedicated to electrical connection modelling for both: * Electromagnetic compatibility〔(EMC Modeling of an Industrial Variable Speed Drive With an Adapted PEEC Method ) IEEE Magnetics Society, Aug. 2010]〕〔(EMC analysis of static converters by the extraction of a complete equivalent circuit via a dedicated PEEC method ) 8th International Symposium on Electric and Magnetic Fields, Mondovi : Italy (2009)]〕 * Power electronics The software employs finite element analysis based on the PEEC Partial element equivalent circuit method 〔A. E. Ruehli: Equivalent Circuit Models for Three-Dimensional Multiconductor Systems, IEEE Transactions on Microwave Theory and Techniques, Vol. 22 (1974), Nr. 3〕 which proved to be efficient to solve Maxwell's equations in low and middle frequency, thanks to its ability to convert interconnections geometry into equivalent RLC circuit,〔(MoM and PEEC Method to Reach a Complete Equivalent Circuit of a Static Converter ) 2009 20th International Zurich Symposium , Jan. 2009]〕 thus avoiding polygonal meshing of the air around the device. InCa3D is developed in France (in collaboration with G2ELab) and distributed by CEDRAT. == Main application fields == InCa3D is well suited for modelling the behaviour of various connectors, * from ICs, small wire bonds and PCBs tracks, * up to bus bars, power modules and large distribution switchboards. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「InCa3D」の詳細全文を読む スポンサード リンク
|