|
Plastination is a technique or process used in anatomy to preserve bodies or body parts, first developed by Gunther von Hagens in 1977. The water and fat are replaced by certain plastics, yielding specimens that can be touched, do not smell or decay, and even retain most properties of the original sample. ==Process== There are four steps in the standard process of plastination: fixation, dehydration, forced impregnation in a vacuum, and hardening. Water and lipid tissues are replaced by curable polymers. Curable polymers used by plastination include silicone, epoxy and polyester-copolymer.〔 The first step of plastination is fixation. Fixation, frequently utilizing a formaldehyde based solution, serves two functions. Dissecting the specimen to show specific anatomical elements can be time consuming. Formaldehyde or other preserving solutions help prevent decomposition of the tissues. They may also confer a degree of rigidity. This can be beneficial in maintaining the shape or arrangement of a specimen. A stomach might be inflated or a leg bent at the knee for example. After any necessary dissections take place, the specimen is then placed in a bath of acetone. Under freezing conditions, the acetone draws out all the water and replaces it inside the cells. In the third step, the specimen is then placed in a bath of liquid polymer, such as silicone rubber, polyester or epoxy resin. By creating a vacuum, the acetone is made to boil at a low temperature. As the acetone vaporizes and leaves the cells, it draws the liquid polymer in behind it, leaving a cell filled with liquid plastic.〔 The plastic must then be cured with gas, heat, or ultraviolet light, in order to harden it.〔 A specimen can be anything from a full human body to a small piece of an animal organ, and they are known as 'plastinates'. Once plastinated, the specimens and bodies are further manipulated and positioned prior to curing (hardening) of the polymer chains. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Plastination」の詳細全文を読む スポンサード リンク
|