|
The RD-0210 (GRAU Index: 8D411K) is also known as the RD-465. It and its twin, the RD-0211, are rocket engines burning N2O4 and UDMH in a oxidizer rich staged combustion cycle. They have single nozzle, possess TVC and are the latest evolution in the RD-0203/4 lineage. They are the engines used on the Proton second stage. The RD-0213 is a fixed nozzle variation that is used on the RD-0212 module of the Proton third stage. == Development == When Chelomey's OKB-52 started their UR-200 ICBM project, they requested S. A. Kosberg's OKB-154 to develop the propulsion. They decided to use the same basic block for both the first and second stage. But to achieve the required performance, Kosberg had to develop a staged combustion engine, a then extremely aggressive feat. Only M. V. Melnikov of OKB-1 had designed a staged combustion engine before, the S1.5400, and it used a different propellant mix with significant less thrust.〔〔 To simplify design and manufacture, the engine would be used both on the first and the second stages. The first stage would use a module - the RD-0202 - that comprised three RD-0203 and one RD-0204, while the upper stage would use a RD-0205 module comprising a RD-0206 main engine plus an auxiliary vernier engine, the RD-0207. The RD-0204 only difference to the RD-0203 was that it included a heat exchanger to heat the pressurant gases for the fist stage tank. The RD-0206 was very similar to the RD-0204, but its nozzle was vacuum optimized and had a fixed nozzle. The thrust vector control task was delegated to the four nozzle RD-0207 vernier engine. While the UR-200 project was in direct competition to the R-36 and was cancelled in favor of the latter, it did had a few test launches and thus was a proven design.〔〔〔 When Chelomey started his super heavy ICBM UR-500 (8K82) project, he originally intended to use multiple UR-200 modules as a first stage. When this concept proved not viable, and the multi-body that was finally used was settled on, they had to search for new propulsion on the first stage. For the second stage, they adapted the UR-200 first stage's. It needed new tanks to match the first stage, but most of the rest could be adapted. The engines had to be started in the air and had to get longer nozzles, optimized for vacuum operation. Both of this features were demonstrated on the RD-0206, and were readily adapted. They also received a thrust vector gimbaling system, to have better control during launch. Thus, the RD-0208/RD-0209 were born. In a parallel case with the RD-0203/4, the RD-0209 was a version of the RD-0208 that included a heat exchanger.〔〔 When the UR-500 proved to be too big as an ICBM, the application of the vehicle as a weapon was cancelled. But it could be adapted as a heavy launch vehicle that could perform important missions for the Soviet moonshot, and so the Proton-K (8K82) was born. This allowed Chelomey to pitch it as a competitor, along the UR-700 project, of Korolev's N-1. For this new missions, it would not need to comply with ICBM specification standards, but would need at least a third stage. The second stage was enlarged, and the RD-0208/9 were revised as the RD-0210 and RD-0211 by uprating them slightly and significantly increasing the burning time. For the third stage, the UR-200 second stage was adapted -again, with the same 4.1m tanking as the first and second stages- and the RD-0205 module with an RD-0206 and an RD-0207 vernier engine was given an overhaul. The new module, - known as RD-0212 - consisted of an RD-0213 and an RD-0214 vernier engine. The RD-0213 was a RD-0206 brought to RD-0211/12 standards, and the RD-0214 was a revised RD-0207.〔〔〔 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「RD-0210」の詳細全文を読む スポンサード リンク
|