| 翻訳と辞書 |
Rolls-Royce/JAEC RJ500
The Rolls-Royce/JAEC RJ500 was a civil turbofan which Rolls-Royce and the Japanese Aero Engine Corporation (JAEC) consortium hoped to develop for aircraft like the Boeing 737-300 and the McDonnell Douglas MD-80.
A single stage fan, driven by a three stage LP turbine, supercharged the 9 stage HP compressor, which was driven by 2 stage air-cooled HP turbine. The combustor was annular and the exhaust separate jets. The HP compressor was based on a scale-up of the Rolls-Royce RB401 HP compressor, with a ninth stage added at the rear. Fan diameter was restricted to 60in, because of the relatively short undercarriage of the 737. Even then, the engine nacelle required an oblate shape so as to improve ground clearance.
Although two prototype engines were built and ground tested, the project was cancelled in the early 1980s because Boeing favoured the CFM56-3.
==Specifications (RJ500)==
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Rolls-Royce/JAEC RJ500」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|