|
A tripod head is the part of a tripod system that attaches the supported device (such as a camera) to the tripod legs, and allows the orientation of the device to be manipulated or locked down. Modular or stand-alone tripod heads can be used on a wide range of tripods, allowing the user to choose which type of head best suits their needs. Integrated heads are built directly onto the tripod legs, reducing the cost of the tripod system. The main function of any tripod head is to provide the ability to hold the attached device fixed in a specific orientation until the user needs to change its position. In the case of a photographic camera, this can help reduce vibration that would appear when using relatively slow shutter speeds while still being able to quickly recompose for another shot, or allow for very long exposures. In cinematography or video applications, a tripod head allows the camera operator to pan and tilt with much more control when compared to hand-holding the camera. The various types of tripod heads available provide different control mechanisms and have distinct applications. Some can restrict movement to a single axis, while others offer robotic movement to increase the precision of the movements. The materials used to construct tripod heads and the physical designs of various heads can be drastically different, depending on their intended use. In some situations a tripod head may be used without a set of tripod legs. Heads can be attached to monopods to provide more versatility, or to a simple plate with a base mount for when the height of a full tripod is unnecessary. ==Base mounts== The base mount is the connection between the tripod head and the tripod legs. Often the head will have a fairly large, flat base that sits on top of the tripod, and uses cork or rubber to increase the friction between the two, to prevent the head from unscrewing during use. The actual connection between the two is often made with a screw. A common standard for base mounts on photographic tripod equipment is a 3/8-16 screw on the tripod (a screw that is 3/8 inches in diameter, with 16 threads per inch) and a matching receptacle on the tripod head. Tripods intended for smaller photographic equipment that do not need to be as rugged (such as point and shoot cameras or smartphones) use a smaller 1/4-20 screw. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Tripod head」の詳細全文を読む スポンサード リンク
|