|
Viscoelasticity is the property of materials that exhibit both viscous and elastic characteristics when undergoing deformation. Viscous materials, like honey, resist shear flow and strain linearly with time when a stress is applied. Elastic materials strain when stretched and quickly return to their original state once the stress is removed. Viscoelastic materials have elements of both of these properties and, as such, exhibit time-dependent strain. Whereas elasticity is usually the result of bond stretching along crystallographic planes in an ordered solid, viscosity is the result of the diffusion of atoms or molecules inside an amorphous material.〔Meyers and Chawla (1999): "Mechanical Behavior of Materials", 98-103.〕 ==Background== In the nineteenth century, physicists such as Maxwell, Boltzmann, and Kelvin researched and experimented with creep and recovery of glasses, metals, and rubbers.〔McCrum, Buckley, and Bucknell (2003): "Principles of Polymer Engineering," 117-176.〕 Viscoelasticity was further examined in the late twentieth century when synthetic polymers were engineered and used in a variety of applications.〔 Viscoelasticity calculations depend heavily on the viscosity variable, η. The inverse of η is also known as fluidity, φ. The value of either can be derived as a function of temperature or as a given value (i.e. for a dashpot).〔 Depending on the change of strain rate versus stress inside a material the viscosity can be categorized as having a linear, non-linear, or plastic response. When a material exhibits a linear response it is categorized as a Newtonian material.〔 In this case the stress is linearly proportional to the strain rate. If the material exhibits a non-linear response to the strain rate, it is categorized as Non-Newtonian fluid. There is also an interesting case where the viscosity decreases as the shear/strain rate remains constant. A material which exhibits this type of behavior is known as thixotropic.〔 In addition, when the stress is independent of this strain rate, the material exhibits plastic deformation.〔 Many viscoelastic materials exhibit rubber like behavior explained by the thermodynamic theory of polymer elasticity. In reality all materials deviate from Hooke's law in various ways, for example by exhibiting viscous-like as well as elastic characteristics. Viscoelastic materials are those for which the relationship between stress and strain depends on time. Anelastic solids represent a subset of viscoelastic materials: they have a unique equilibrium configuration and ultimately recover fully after removal of a transient load. Some phenomena in viscoelastic materials are: * if the stress is held constant, the strain increases with time (creep) * if the strain is held constant, the stress decreases with time (relaxation) * the effective stiffness depends on the rate of application of the load * if cyclic loading is applied, hysteresis (a phase lag) occurs, leading to a dissipation of mechanical energy * acoustic waves experience attenuation * rebound of an object following an impact is less than 100% * during rolling, frictional resistance occurs All materials exhibit some viscoelastic response. In common metals such as steel or aluminum, as well as in quartz, at room temperature and at small strain, the behavior does not deviate much from linear elasticity. Synthetic polymers, wood, and human tissue as well as metals at high temperature display significant viscoelastic effects. In some applications, even a small viscoelastic response can be significant. To be complete, an analysis or design involving such materials must incorporate their viscoelastic behavior. Knowledge of the viscoelastic response of a material is based on measurement. Some examples of viscoelastic materials include amorphous polymers, semicrystalline polymers, biopolymers, metals at very high temperatures, and bitumen materials. Cracking occurs when the strain is applied quickly and outside of the elastic limit. Ligaments and tendons are viscoelastic, so the extent of the potential damage to them depends both on the velocity of the change of their length as well as on the force applied. A viscoelastic material has the following properties: * hysteresis is seen in the stress–strain curve * stress relaxation occurs: step constant strain causes decreasing stress * creep occurs: step constant stress causes increasing strain 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Viscoelasticity」の詳細全文を読む スポンサード リンク
|