|
A balise is an electronic beacon or transponder placed between the rails of a railway as part of an automatic train protection (ATP) system. The French word "balise" is used to distinguish these beacons from other kinds of beacon.〔http://www.proz.com/kudoz/italian_to_english/engineering_general/1098534-balise.html〕 Balises are used in the KVB signalling system installed on main lines of the French railway network, other than the high-speed Lignes à Grande Vitesse. Balises constitute an integral part of the European Train Control System, where they serve as "beacons" giving the exact location of a train. The ETCS signalling system is gradually being introduced on railways throughout the European Union.〔'EC sets out ERTMS deployment deadlines,' http://www.railwaygazette.com/news/single-view/view//ec-sets-out-ertms-deployment-deadlines.html〕 Balises are also used in the Chinese Train Control System versions CTCS-2 and CTCS-3 installed on high-speed rail lines in China, which is based on the European Train Control System. A balise which complies with the European Train Control System specification is called a Eurobalise. == Overview == A balise typically needs no power source. In response to radio frequency energy broadcast by a Balise Transmission Module mounted under a passing train, the balise either transmits information to the train ('Uplink') or receives information from the train ('Downlink,' although this function is rarely used). The transmission rate is sufficient for a complete 'telegram' to be received by a train passing at any speed up to 500 km/h. A balise may be either a 'Fixed Data Balise,' or 'Fixed Balise' for short, transmitting the same data to every train, or a 'Transparent Data Balise' which transmits variable data, also called a 'Switchable' or 'Controllable Balise'. (Note that the word 'fixed' refers to the information transmitted by the balise, not to its physical location. All balises are immobile). A fixed balise is programmed to transmit the same data to every train. Information transmitted by a fixed balise typically includes: the location of the balise; the geometry of the line, such as curves and gradients; and any speed restrictions. The programming is performed using a wireless programming device. Thus a fixed balise can notify a train of its exact location, and the distance to the next signal, and can warn of any speed restrictions. A controllable balise is connected to a Lineside Electronics Unit (LEU), which transmits dynamic data to the train, such as signal indications. Balises forming part of an ETCS Level 1 〔ERTMS Levels http://www.ertms.com/media/2428/fact-3.pdf〕 signalling system employ this capability. The LEU integrates with the conventional (national) signal system either by connecting to the lineside railway signal or to the signalling control tower. Balises must be deployed in pairs so that the train can distinguish the direction of travel 1→2 from direction 2→1, unless they are linked to a previous balise group in which case they can contain only one (1) balise. Extra balises (up to 8 per group) can be installed if the volume of data is too great. Balises operate with equipment on the train to provide a system that enhances the safety of train operation: at the approaches to stations with multiple platforms fixed balises may be deployed, as a more accurate supplement to GPS, to enable safe operation of automatic selective door opening. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「balise」の詳細全文を読む スポンサード リンク
|