|
A dilatant (also termed shear thickening) material is one in which viscosity increases with the rate of shear strain. Such a ''shear thickening fluid'', also known by the initialism ''STF'', is an example of a non-Newtonian fluid. thumbnail A dilatant is a Non-Newtonian fluid where the shear viscosity increases with applied shear stress. This behavior is only one type of deviation from Newton’s Law, and it is controlled by such factors as particle size, shape, and distribution. The properties of these suspensions depend on Hamaker theory and Van der Waals forces and can be stabilized electrostatically or sterically. Shear thickening behavior occurs when a colloidal suspension transitions from a stable state to a state of flocculation. Such behavior is currently being researched for use in body armor applications by companies like Dow Corning with their Active Protection System.〔() 〕 A large portion of the properties of these systems are due to the surface chemistry of particles in dispersion, known as colloids. This can readily be seen with a mixture of cornstarch and water (sometimes called oobleck), which acts in counterintuitive ways when struck or thrown against a surface. Sand that is completely soaked with water also behaves as a dilatant material. This is the reason why when walking on wet sand, a dry area appears directly underfoot. Rheopecty is a similar property in which viscosity increases with cumulative stress or agitation over time. The opposite of a dilatant material is a pseudoplastic. ==Definitions== There are two types of deviation from Newton's Law that are observed in real systems. The most common deviation is shear thinning behavior, where the viscosity of the system decreases as the shear rate is increased. The second deviation is shear thickening behavior where, as the shear rate is increased, the viscosity of the system also increases. This behavior is observed because the system crystallizes under stress and behaves more like a solid than a solution. Thus, the viscosity of a shear-thickening fluid is dependent on the shear rate. The presence of suspended particles often affects the viscosity of a solution. In fact, with the right particles, even a Newtonian fluid can exhibit non-Newtonian behavior. An example of this is cornstarch in water and is included in the Examples section below. The parameters that control shear thickening behavior are: particle size and particle size distribution, particle volume fraction, particle shape, particle-particle interaction, continuous phase viscosity, and the type, rate, and time of deformation. In addition to these parameters, all shear thickening fluids are stabilized suspensions and have a volume fraction of solid that is relatively high. Viscosity of a solution as a function of shear rate is given via the Power Law equation, where η is the viscosity, K is a material-based constant, and γ̇ is the applied shear rate. : Dilatant behavior occurs when n is greater than 2. Below is a table of viscosity values for some common materials. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「dilatant」の詳細全文を読む スポンサード リンク
|
